Products & commissioning

Compleo Charging Stations

Updated on 22/11/2026

All activities described here may only be carried out by qualified electricians.

Compleo SOLO N Socket

Compleo Charging Stations – Abbildung 1

The Compleo SOLO N Socket is a smart AC wallbox for convenient use at home.

The smart charging station is equipped to maximize self-consumption of surplus energy from your own PV system. The robust and convenient wallbox focuses on safety, ease of use, and smart charging thanks to the integrated automatic 1/3-phase switching.

“Safe” - Maximum safety

The Compleo SOLO N Socket offers optimal safety for home use, all integrated in one housing. The SOLO N has the most important protection components integrated in the housing, i.e.:

  • Type A residual current circuit breaker
  • DC residual current detection
  • Resettable residual current circuit breaker (RCD) with self-test function

In addition to maximum safety, this saves valuable installation time and space in the electrical installation.

Note: Unlike the Compleo SOLO N+, the Compleo SOLO N has no integrated Type 1+2+3 surge protection (according to DIN EN 61643-11). You can find more information in the technical data sheet.

The resettable residual current circuit breaker (RCD) with self-test function provides a further safety feature. If a vehicle trips it, the next user resets the RCD via the sliding cover (at the same time as plugging in the charging cable). This avoids complex and costly service calls.

If an additional RCD is required due to the installation conditions, the required selectivity must be ensured.

Likewise, when installing an upstream RCD, the requirements of the grid operator must be taken into account.

Key features at a glance:

  • 11 kW charging power (AC) as delivered, can be increased to 22 kW by a qualified electrician, designed as a Type 2 socket, incl. sliding cover
  • Maximization of self-consumption through automatic 1-3-phase switching
  • Can be integrated with any IT backend via communication over OCPP 1.6 JSON
  • Energy and load management via communication with third-party devices over Modbus TCP/IP
  • Various safety and protection components integrated in the housing (Caution: without Type 1+2+3 surge protection)
  • Mounting on a pedestal is also possible (Compleo Pole N Single / Compleo Pole N Duo)

Pedestals (poles) for Compleo SOLO N Socket

Compleo Charging Stations – Abbildung 2Compleo Charging Stations – Abbildung 3

Compleo Pole N Single >Data sheet as PDF

Compleo Pole N Duo >Data sheet as PDF

Pedestals in the "Single" version are intended for mounting one wallbox. Pedestals in the "Duo" version are intended for up to two wallboxes.

Compleo SOLO N+

The Compleo SOLO N+ is a smart, safe AC wallbox, equipped to maximize self-consumption of surplus energy from your own PV system. It is suitable for both public and private use.

The robust and convenient wallbox focuses on safety and optimal protection through an all-in-one design with all protection components integrated in the housing, and on smart charging thanks to the integrated automatic 1/3-phase switching.

In addition, the Compleo SOLO N+ is compliant with calibration law (according to German calibration law) and hardware-ready for Plug & Charge applications according to ISO15118.

Compleo Charging Stations – Abbildung 4Compleo Charging Stations – Abbildung 5

Compleo SOLO N+ Socket >Data sheet as PDF

Compleo SOLO N+ Charging cable >Data sheet as PDF

“Safe” - Maximum safety in an all-in-one design

The Compleo SOLO N+ offers the highest safety, all integrated in one housing. The SOLO N+ has all protection components integrated in one housing.

  • Type A residual current circuit breaker
  • Type 1+2+3 surge protection according to DIN EN 61643-11
  • DC residual current detection 6 mA
  • Resettable residual current circuit breaker (RCD) with self-test function

In addition to maximum safety, this saves valuable installation time and space in the electrical installation.

The resettable residual current circuit breaker (RCD) with self-test function provides a further safety feature. If a vehicle trips it, the next user resets the RCD via the sliding cover (at the same time as plugging in the charging cable). This avoids complex and costly service calls.

If an additional RCD is required due to the installation conditions, the required selectivity must be ensured.

Likewise, when installing an upstream RCD, the requirements of the grid operator must be taken into account.

The SOLO N+ also has a built-in Type 1+2+3 surge protection in the charging station, which allows a distance (cable length) of >10 m from the low-voltage main distribution board to the charging station without additional protection. Important: Do not confuse this with the distance between the charging station and the electric vehicle, which may only be approx. 7 m at most.

Key features at a glance:

Compleo SOLO N+ Socket

Compleo SOLO N+ Charging cable

  • Max. 22 kW charging power (AC) - Designed as a Type 2 socket, incl. sliding cover
  • Max. 11 kW charging power (AC) - Designed as a Type 2 charging cable, 7.5 m (max. 11 kW)
  • All safety and protection components integrated in the housing - Maximization of self-consumption through automatic 1/3-phase switching - Compliant with calibration law according to German calibration law - MID meter - Equipped with RFID & NFC readers - Can be integrated with any IT backend via communication over OCPP 1.6 JSON - Energy and load management via communication with third-party devices over Modbus TCP/IP - 4G modem, LAN - Hardware-ready for Plug & Charge according to ISO15118 - Mounting on a pedestal is also possible (Compleo Pole N+ Single / Compleo Pole N+ Duo)

Pedestals (poles) for Compleo SOLO N+

Poles plus2Poles plus1

Compleo Pole N+ Single >Data sheet as PDF

Compleo Pole N+ Duo >Data sheet as PDF

Pedestals in the "Single" version are intended for mounting one wallbox. Pedestals in the "Duo" version are intended for up to two wallboxes.

"Smart" - Automatic 1/3-phase switching

Automatic phase switching maximizes self-consumption by making optimal use of surplus energy from your own PV system.

This means that the charging station automatically switches to single-phase or three-phase charging once a defined threshold is reached.

Example: Charging starts in the morning with little surplus on a single phase and automatically switches to three-phase charging when there is enough surplus. Likewise, when the surplus declines, it switches back to single-phase charging. Switching makes sense with vehicles that can charge on multiple phases.

*

Compleo Charging Stations – Abbildung 8

>Detailed explanation of automatic 1/3-phase switching*

Installation notes

For instructions on installing and mounting the Compleo SOLO charging products, refer to the respective operating manual.

Here we show the most important mounting steps summarized in a video:

Key differences between WHIZZY, BOXX & BOOGIE and Compleo SOLO N & N+

The older charging products WHIZZY, BOXX, BOOGIE are no longer on the price list (end of life)

Overview of the most important differences:

  • No individual branding or neoom branding of the Compleo SOLOs
  • OCPP & Modbus TCP/IP
  • Automatic 1/3-phase switching
  • Resettable RCD with self-test function
  • Control contacts for processing the ripple control receiver signal from the grid operator for power adjustment
  • Compleo SOLO N+
    • Compliant with calibration law (German calibration law)
    • Hardware-ready for Plug & Charge according to ISO15118
    • All-in-one design with all protection components

PDFs

Knowledge base articles


>Detailed explanation of automatic 1/3-phase switching


More on Charging stations