With this function, you can set a battery SoC limit on all commercial storage systems (BLOKK, BLOKK Light, BLOKK Light NEA and TERRA). Above this limit, the battery is only charged once a certain PV power surplus is reached.
Why this is useful:Normally, the battery is fully charged with PV power, and only afterwards is the surplus PV power fed into the grid. This can be a disadvantage if the grid operator imposes a power limit on grid feed-in: the battery is typically fully charged in the morning, and from midday, when the PV system produces at full power, the surplus power cannot be fully delivered to the grid because of the feed-in power limit, so the PV inverter has to be curtailed.
With the new function, you can set how far (up to which SoC) the battery is charged at full power. Once the set SoC is reached, the PV power is first sent to the grid at no more than the set feed-in power, and the battery is only fully charged once the PV surplus exceeds the set feed-in power value.
You can configure the function at connect.neoom.com --> "Geräte" --> (select the BLOKK or TERRA storage system) --> "Steuerung" tab:

In the example above, the battery is first charged with PV power up to an SoC of 70%. After that, PV power is fed into the grid up to a maximum of 30 kW. Only when the feed-in power (= PV surplus) exceeds 30 kW is the battery charged further. If the feed-in power does not exceed 30 kW, the battery is not charged further.
Benefit: The function can increase the amount of energy fed in when the PV power exceeds the maximum permitted feed-in power.
Important:
- The function is available on BLOKK systems from software version 2.3.x and on Terra systems from software version 3.x
- The function can be used when the battery is operated in the neoom Ai optimization strategy "Solar".
You can find more on related topics in these articles:
➜ [Time-controlled feed-in prioritization](../../../Energiemanagement%20(neoom%20Ai)/Funktionen/Speicher%20steuern/zeitgesteuerte-einspeisepriorisierung__4821483545.md) – Learn how to prioritize feeding in PV surpluses during defined periods and thus avoid curtailment losses.
➜ [Intelligent feed-in from the battery with neoom Ai](../../../Energiemanagement%20(neoom%20Ai)/Funktionen/Speicher%20steuern/graustrom-einspeisen-aus-der-batterie__4820500702.md) – Learn how neoom Ai controls your battery to feed in surpluses efficiently and increase the self-sufficiency of your energy community.
➜ [Setting a feed-in limit, the battery system reserve and the battery charging currents in neoom Ai](../../../Energiemanagement%20(neoom%20Ai)/Inbetriebnahme%20neoom%20Ai/einstellen-einer-einspeisebegrenzung-in-neoom-ai__4821450765.md) – Learn how to configure key battery and feed-in parameters directly in the web portal.